Blister light box popularity
Blister light box is blister based
After the bubble cap plate is heated to a certain temperature at a high temperature,
According to the design requirements and engraving mold combination
Extrusion box hollow advertising carrier
Generally divided into single-sided and double-sided blister
Generally used for outdoor shop signs door head, etc.
Can do a variety of concave and convex complex modeling
It has the characteristics of waterproof, luminous and three-dimensional
Blister light box is characterized
1, attract the eye
Originality and originality will always be the tenet of the advertising industry.
Pursuit of goals and development of the power
Today in the proliferation of print advertising
The public needs a way to relax their eyes
New forms of advertising
Blister light box came into being
Blister light box advertising broke through the traditional two-dimensional performance
Activating Human Space Imagination with Three-dimensional Modeling
Strong sense of three-dimensional modeling
2. High cost performance:
Taking into account the day and night effect
3. Green environmental protection:
Because acrylic materials can be recycled
Therefore, it is regarded as the 21st century
Forms of Green Advertising
Coloring method
1. Film pasting:
For the expression form is simple, the amount is small
Low cost accounting plastic light box
We use the film method
But it must be emphasized here
Don't use cheap film that fades easily in the market.
Be sure to use those brand lamp films with long shelf life outdoors
Otherwise, the maintenance cost will be very high
This temporary low cost will lead to higher maintenance costs
2. Screen printing:
This is our most common plastic light box image processing
is also more ideal
Especially when there is a certain amount, we try to adopt this method.
But in screen printing, you have to use good ink.
Because we have to bake and press plates at high temperatures.
Otherwise, the production process is very easy to scratch
After using for a period of time, it is also easy to fade
3. There is also an outdoor photographic film
General quantity is small
This method is difficult to match with the blister light box.
But be sure to use outdoor lights
Process Introduction
From multinational McDonald's, KFC and Pizza Hut
Go to the domestic supermarket chains and banks
Jiefang Commercial Vehicle Service Center
All of these are pregnant with advertising product identification of the huge business opportunities
Acrylic processing can not be separated from the mold
The mold can be made of wood, plaster, steel, etc.
The choice of mold material can be determined according to the number of processing batches
Wood mold cost savings
Only suitable for small processing
Because it will lose water and deform after using it for a long time.
The finished product is naturally unsightly
Also cause trouble for post-production (need to deal with)
Foam light box and three-dimensional luminous performance of the same pre-production
Film making → heating (about 160 degrees) → automatic vacuum suction
"Cool (about 40 degrees)" "Peel" trim
→ Add slot → Three-dimensional luminous characters
Edge trimming → bonding lettering plate → block splicing → plastic light box
Xiamen Dacheng
2020-11-20
Xiamen Dacheng supplies ASA blister board and ODM & OEM processing service
view more
No. 19, Baihuyan Road, Houxi Town, Jimei District, Xiamen, China 503
Fax：0592-5516862
E-mail：8001@xmdcsj.cn