Equipment cover: What is the main function of the machine cover?
Equipment enclosure: What is the main function of the machine protective cover?
The protective cover can prevent dust, debris, hard sand, etc. Starting from entering the track, the damage of hard granular foreign matter to the surface of the slide rail is reduced, the influence of the guide rail on the machining accuracy due to the operation deformation is reduced, and the machining accuracy of the machine tool is maintained. The surface of the protective cover shall be smooth and free of burrs and sharp edges and corners, and shall not become a new source of danger; the protective cover shall not affect the line of sight and normal operation, and shall be convenient for inspection and maintenance of the equipment. Then the equipment cover: What is the main function of the machine protective cover?
Equipment enclosure: What is the main function of the machine protective cover?
The main function of the machine protective cover is to prevent personal injury accidents.
1. It can be dustproof, waterproof and oil-proof. The protective cover can isolate the contact between the front of the robot and the surrounding environment, prevent dust, water stains and oil stains generated during operation from entering the inside of the machine, and reduce its use time;
2. High temperature wear-resistant, flame retardant and fireproof. The material selected for the protective cover has the characteristics of high temperature resistance and wear resistance, which can effectively protect the mechanical equipment from damage;
3. Disassembly is convenient, simple and fast. The protective cover adopts a detachable design and can be disassembled at any time to repair the equipment, clean the protective cover, and extend the service life.
4. Improve the environment and enhance the image. After the robot installed the protective cover in the workshop, it changed the old mess, improved the production environment of the workshop, and made the image of the workshop look new.
It can prevent dust, debris, hard sand, etc. Starting from entering the track, the damage of hard granular foreign matter to the surface of the slide rail is reduced, the influence of the guide rail on the machining accuracy due to the operation deformation is reduced, and the machining accuracy of the machine tool is maintained. The surface of the protective cover shall be smooth and free of burrs and sharp edges and corners, and shall not become a new source of danger; the protective cover shall not affect the line of sight and normal operation, and shall be convenient for inspection and maintenance of the equipment.
Equipment enclosure: What are the special purposes of the machine protective cover?
Sometimes, the camera is installed in a highly harsh environment, which not only has the characteristics of high sealing, cold resistance, heat resistance, wind and sand resistance, rain and snow resistance, etc. Like a general outdoor protective cover, it also has the characteristics of anti-smashing, anti-impact, anti-corrosion and even need to be used in explosive environments. Therefore, a dedicated protective cover with high safety is used.
protective cover selection method is what?
The protective cover is used to protect the camera and lens, and is divided into indoor type and outdoor type. When selecting the protective cover, pay attention:
(1) According to the installation location, choose the indoor or outdoor protective cover correctly. The main function of the indoor protective cover is to prevent dust, while the main function of the outdoor protective cover is to protect the camera from working normally in various harsh natural environments (such as rain, snow, low temperature, high temperature, etc.).). Therefore, the outdoor protective cover not only has a more stringent sealing structure, but also has multiple functions such as wiper, spray, heating, and cooling.
(2) Select the protective cover of the corresponding size. The size of the protective cover should be greater than the sum of the sizes of the camera and the lens, otherwise the camera and the lens cannot be installed.
(3) If you choose a protective cover with constant temperature function, consider the power supply of the protective cover; choose a protective cover with wiper function. If there is a decoder, it can be controlled by the decoder. If there is no decoder, you can consider adding a relay to control.
Xiamen Dacheng
2020-11-20
Xiamen Dacheng supplies ASA blister board and ODM & OEM processing service
view more
No. 19, Baihuyan Road, Houxi Town, Jimei District, Xiamen, China 503
Fax：0592-5516862
E-mail：8001@xmdcsj.cn